Public buildings and commercial buildings have boldly changed the traditional roof buildings into glass roof structures in order to improve the natural lighting rate and permeability of buildings. From then on, natural lighting and transparency and aesthetics can be greatly increased. Because daylighting roof building also adds bad effects such as illumination discomfort and excessive indoor temperature increase. In order to solve the contradiction between these buildings, it is necessary to choose outdoor shading system for roof glass roof buildings.
The shading mechanism of glass roof can be divided into two ways, one is outside the glass roof and the other is inside the building. Usually it is referred to as external shading and internal shading. However, in large shopping malls, gymnasiums, Hotel atriums and office halls, if we choose to install the inner shading system, there will be a number of problems, such as difficulty, poor shading effect, difficulty in later maintenance, low safety factor and so on, while the outer shading system perfectly avoids these problems. So why choose an outdoor shading system? Let Shangchao Shade Xiaobian tell you:
1. Installation is convenient, fast and safe
Outdoor sunshade products are manufactured according to the size measured on site. Before installing the outdoor sunshade system, we need to go to the site to install the embedded parts and lay the installation points. When installing, only fixed debugging is needed. Because the glass roof is flat, the construction reduces the risk of high-altitude operation. Therefore, compared with the internal shading system, the installation of external shading products is more convenient and safe.
2. Superiority of masking
Outdoor shading products are solar radiation directly separated from the outside of the glass. Compared with indoor shading, only a small part of the heat source that has entered the room can be blocked. The distance between the outdoor shading system installed outside the glass roof and the glass has reserved about 10 cm space, so that heat can be carried away through the convection of air, while the inner shading can only watch the heat enter with open eyes. Entry into the room without effective barrier, so that indoor heat accumulation, resulting in poor insulation effect. Data show that 80% of the heat eventually enters the room through indoor shading, while only 40% of the heat enters the room through outdoor shading. It can be seen from this that the external shading product system is much more effective than the internal shading product system, and the energy-saving effect is more superior.
3. Construction and maintenance are more convenient
There are platforms outside the roof glass roof. Installation and maintenance are basically the same as ground operation. What problems can be solved at any time without using scaffolding or climbing equipment, which greatly reduces the difficulty of construction. The most important thing is that maintenance and cleaning do not affect the normal operation of indoor, which is very convenient.
4. Safety protection function
The outdoor shading system can also form a protective layer on the glass surface, reduce the damage caused by heavy objects, especially reduce the self-explosion caused by the high temperature of the glass exposed to the sun for a long time, protect the glass top, thus prolong the service life of the glass top, and play a certain role in safety protection.
Suzhou Himalayan Intelligent Sunshade, 12 years of industry and engineering experience, focusing on building indoor and outdoor sunshade system, dedicated to building a comfortable energy-saving, fashionable office and living space for modern glass roof building, so that warming issues no longer affect people's lives.
Address: Room 1810-1811, No. 118, Jiufeng road,Songjiang district, Shanghai201699,China
Copyright © 2019 Shanghai SUNC Intelligence Shade Technology Co.,Ltd. All rights reserved. If copying is imitated, the legal liability shall be investigated.